-13%
Climax 755 Safety Half Face Respirator Mask With Two A1 Filters
Original price was: £10.95.£8.95Current price is: £8.95.
Climax Filter 757/762-P3 UNITS
Original price was: £5.99.£4.98Current price is: £4.98.
Climax 755 Safety Respirator
Original price was: £15.50.£13.55Current price is: £13.55.
15 in stock
Description
The Climax 755 Half Face Mask comes with two A2/P3 Filters
The Climax 755 Half Face Mask has been designed to provide maximum protection against gases, vapours, and particles such as dust, mist and smoke. The half mask is compatible with filters Climax mod. 755 and 756.Â
About A2/P3 Filters
Filter A2 against gases and vapours from chemical compounds made up of ABS black base fitted with a round cover made up with the same material. Between the cover and the base there is a pre-filter with a high absorption capacity against particles.
Filter A2 against gases and vapours from chemical compounds made up of ABS black base fitted with a round cover made up with the same material. Between the cover and the base there is a pre-filter with a high absorption capacity against particles.
Filter P3 against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material. Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint. Varnishing with solvent-based paint, asbestos removal. Protection against bacterias and viruses. Suitable for the retention of particles of welding fumes.
Filters Protection Against – See Below:
Type A, Colour Brown: Organic gases and vapours with boiling point> 65 oC
Type P, Colour White: Partical Filter
Type A, Colour Brown: Organic gases and vapours with boiling point> 65 oC
Type P, Colour White: Partical Filter
Characteristics
Main body of the half mask:
The main body of the half mask is made from thermo-plastic rubber.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.
Exhaling valves:
The half mask is fitted with an exhaling valve made up of a valve-holder and a membrane, which makes it easier for exhaled air to escape.
Fastening harness:
It has a comfortable neck strap and head strap that can be easily adjusted to the right length.
Filters:
The filters are secured to the half mask with a thread system
Combined Filters:
A1-P3/A2-P3
A1-P3/A2-P3
B1-E1-P3
A1-B1-E1-K1-P3
Special Filters:
A1-B1-E1-K1-Hg-P3
CE Certification
Norm: EN 140:1999
Regulation (EU) 2016/425
Control body number: 0082
Tests
Temperature resistance: Satisfying
Breathing resistance;
Inhalation 30 I/min: Satisfying
Inhalation 95 I/min: Satisfying
Inhalation 160 I/min: Satisfying
Exhalation 160 I/min: Satisfying
CO2 content: Satisfying
Resistance against the traction elements:
Harness straps: Satisfying
Connectors: Satisfying
Exhaling valve-holder: Satisfying
Inflammability: Satisfying
Inward leakage: Satisfying
Practical behaviour: Satisfying
Use limitations
The equipment must not be used in environments where the level of oxygen is lower than 19.5%.
Additional information
| Weight | 0.22000000 kg |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
Shipping & Delivery
